Travel Mini Mac Lite T Balloon Pump
There are many advantages to using a Professional Manual Pump. You no longer have to worry about running out of power, replacing or charging the battery during a gig, or bothering customers with the noise!
The new Mini Mac Lite Travel Pump is what you've come to expect from the MacPump Family of pumps. It is a very hard working reliable pump. It is dimensionally the same as a standard Mini Mac Lite balloon pump, with one very nice advantage, it comes apart to fit inside a standard suite case making travel easier than ever.
If you're looking for a light weight but well built pump - this is it! The Mini Mac light weighs 4.5 lbs and stands 34" tall. This pump will appeal to every twister out there because of its versatility and ease of use.
Return policy: The Travel Mini Mac Light Travel Balloon Pump can be returned within 10 days in like new condition, plus a 20% reconditioning fee.
Warranty: The Mini Mac Light Travel Balloon Pump comes with a limited 2 year warranty. The pump is covered 100% from manufacturing defects. Any other damage to the pump will be evaluated on a case-by-case basis. If you need to have the Mini Mac Light replaced or repaired, please send your pump to the address below with an explanation of the damage, as well as enough postage necessary to return your pump to you once it is repaired. Upon receipt, a determination will be made on the liability of the warranty. Return shipments will be shipped common carrier best way.
All return shipments: The Mini Mac Light Balloon Pump must be packaged in its original box and/or in a way that no damage will occur during transit. For any questions about the Mini Mac Light Balloon Pump that T Myers Magic could not answer to your satisfaction, please contact the number below.
ATTN: Repair Department
42 WOODWARD AVENUE
BATTLE CREEK, MI 49017
Maintenance and care:
Remove the nylon screw at the top of the 3" cylinder and lift the center pole out (you may have to lift moderately hard to separate the pump). With a clean cloth or paper towel wipe off the valve assembly and O ring. Check O ring for ware - if worn out then replace the O ring (available from macpump.net).
If O ring is okay use a light amount of Vaseline on the O ring. Wipe out the cylinder with a clean cloth or paper towel. Once the cylinder is clean place a small amount of Vaseline around the inside of the 3" cylinder below the air intake hole.
Reassemble the pump by place the center pole, valve assembly first into the 3" cylinder. The center pole should be inserted at a slight angel take care NOT to pinch the O ring. Once inserted into the cylinder, straighten and replace the cap aligning air intake hole and threaded hole and replace nylon screw. You should now be ready to go.